HKUST Institutional Repository >
Mechanical Engineering >
MECH Conference Papers >
Please use this identifier to cite or link to this item:
|Title: ||A multi-scale interfacial delamination model of Cu-SAM-epoxy systems|
|Authors: ||Fan, Haibo|
Wong, Cell K. Y.
Yuen, Matthew Ming-Fai
|Issue Date: ||2008 |
|Citation: ||Proceedings International Conference on Electronic Packaging Technology & High Density Packaging (ICEPT-HDP 2008), Shanghai, China, 28-31 July 2008|
|Abstract: ||Interfacial delamination, due to the presence of dissimilar material systems, is one of the primary concerns in electronic package design. The mismatch in coefficient of thermal expansion between the different layers in the packages can generate high interfacial stresses due to thermal loading during fabrication and assembly.
More and more functional materials at the nano scale are, such as self-assembly monolayer (SAM) and CNT, used in electronic packaging for the improvement of the interfacial performance, traditional continuum model without considering these nano materials are obviously not suitable to study performance of electronic packages. In this study, a multi-scale model was built to investigate interfacial failure between EMC and SAM coated copper substrate. The interfacial material behavior was derived from the molecular dynamics simulation. The constitutive relation for the EMC-SAM-Cu interface under tensile load was derived from MD simulation. Tapered double cantilever beam tests (TDCB) were conducted on the laminated specimens to quantify the load during delamination propagation along the EMC-Cu interface with SAM and without SAM. Finite element models of the DCB test were built using ANSYS with interfacial element at the Cu-EMC interface. The constitutive relations from MD simulations in the form of a traction-displacement plot were introduced into the cohesive zone model to study the constitutive response of the EMC-Cu interface under the tensile loading, which is traversed across the length scale from nanoscale to macroscale. and assigned to the continuum model. The critical loading forces for the EMC/Cu interface with SAM and without SAM were obtained from the multi-scale model. It was found that interfacial strength between EMC and Cu substrate could be improved by SAM. Based on the proposed method, the predicted results were found to be comparable with those from experimental measurement.|
|Rights: ||© 2008 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.|
|Appears in Collections:||MECH Conference Papers|
Files in This Item:
All items in this Repository are protected by copyright, with all rights reserved.