Please use this identifier to cite or link to this item:

Methane emissions abatement by multi-ion-exchanged zeolite a prepared from both commercial-grade zeolite and coal fly ash

Authors Hui, Kai Lung View this author's profile
Chao, Christopher Yu Hang View this author's profile
Issue Date 2008
Source Environmental science & technology , v. 42, (19), 2008, OCT 1, p. 7392-7397
Summary The performance of multimetal-(Cu, Cr, Zn, Ni, and Co)-ion-exchanged zeolite A prepared from both a commercial-grade sample and one produced from coal fly ash in methane emissions abatement was evaluated in this study. The ion-exchange process was used to load the metal ions in zeolite A samples. The methane conversion efficiency by the samples was studied under various parameters including the amount of metal loading (7.3-19.4 wt\%), reaction temperature (25-500 degrees C), space velocity (8400-41 900 h(-1)), and methane concentration (0.5-3.2 vol \%). At 500 degrees C, the original commercial-grade zeolite A catalyzed 3\% of the methane only, whereas the addition of different percentages of metals in the sample enhanced the methane conversion efficiency by 40-85\%. Greater methane conversion was observed by increasing the percentage of metals added to the zeolite even though the BET surface area of the zeolite consequently decreased. Higher percentage methane conversion over the multi-ion-exchanged samples was observed at lower space velocities indicating the importance of the mass diffusion of reactants and products in the zeolite. Compared to the multi-ion-exchanged zeolite A prepared from the commercial-grade zeolite, the one produced from coal fly ash demonstrated similar performances in methane emissions abatement, showing the potential use of this low cost recycled material in gaseous pollutant treatment.
ISSN 0013-936X
Language English
Format Article
Access View full-text via DOI
View full-text via Web of Science
View full-text via Scopus