||Wong, Wales Kin Fai
Tsang, Danny H. K.
||Proceedings of IEEE ATM Workshop '95, Washington, D. C., USA,
, 1995, October
||All the current rate-based proposals suggest to adjust the source transmission rate based on the received RM cell immediately. However, this approach may lead to overloading of the bottleneck switch. We propose that the adjustment should be delayed. The amount of delay depends on the source-to-bottleneck separations of different connections, which can be obtained during the call setup. Based on our Max-Min scheme  that can rapidly achieve the fair share allocation, a new rate-based switch mechanism is proposed to take into account of the delay. With this, overloading of the bottleneck switch due to the different source-to-bottleneck separations can be avoided and thus, the peak queue length of the bottleneck switch can be minimized.
||© 1995 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.
Files in this item: